Product Category
Telephone:
Email:
Address:
No.5, Zhaozhuang Industrial Park, Liu Changshan Road, Shizhong District, Jinan City
Products->Other construction machinery and equipment
XTD3130(TZ3A) Three arm rock drilling trolley
Product Introduction The XTD3130 (TZ3A) three arm rock drilling rig is mainly used for excavation and construction operations in tunnels, mines, and other underground engineering tunnels and tunnels. It can perform operations such as drilling and blasting holes, anchor rod holes, slotting holes, installing explosives, anchor rods, air ducts, etc., with a maximum coverage area of 180m2. Performance characteristics Imported rock drills with super strong anti bending ability, high drilling speed, and low drilling tool loss; The beam is propelled by high-strength aluminum alloy, with strong bending resistance; The design of single-layer coils and seismic resistant pipe clamps greatly improves the service life of pipelines; Compact structure, load-bearing capacity, high strength, and good seismic absorption performance: The retracted state has good passability, while the extended state can significantly increase the coverage range of the drill arm; Adopting a three pump system with clear division of labor, strong anti-interference ability, and stable output flow rate: Rock drilling operations are directly controlled by hydraulic pressure, with streamlined pipelines and easy maintenance. The drilling system has anti jamming, anti hitting, and automatic retreat functions, effectively improving drilling efficiency and reducing drilling tool losses Selecting internationally renowned brands such as Schneider and Siemens for electrical components with high reliability and long service life: equipped with ground fault protection, phase sequence protection, motor overload protection, engine fault alarm and other protective alarm functions; GPS monitoring and unlocking of the vehicle, fuel heating and other optional functions to expand the range of use of the trolley; Adopting a Deutz engine with strong power, the emissions meet the Euro emission standards and meet the environmental protection requirements for underground space construction. Walking is driven by hydraulic machinery, rear wheel steering, and four-wheel drive, meeting the requirements for passing through complex terrains such as tunnels; Open cab with good visibility and equipped with fans to improve the construction environment; Adopting ergonomic design to enhance operational convenience; Provide safe and reliable protection for power, transmission, hydraulic, electrical and other systems. Leave openings in necessary positions for easy operation of power switches; The hood door is easy to open and close. <!--br {mso-data-placement:same-cell;}--> td {white-space:nowrap;border:1px solid #dee0e3;font-size:10pt;font-style:normal;font-weight:normal;vertical-align:middle;word-break:normal;word-wrap:normal;} Parameter Name unit Parameter units Maximum coverage area and operating range m2 180 Turning radius mm 15725 x 13075 Walking speed km/h 5500/11500 Climbing ability ° 15 External dimensions mm 15 Equipment weight kg 16000 x 2950 x 3400 47500 Parameter Name rock drill Brand and model / 蒙特贝HC109 Impact power kw 18.8 engine brand / DEUTZTCD2013L062V power kw 200 emission standard / 欧Ⅲ drill boom Telescopic stroke mm 1600 Thruster compensation stroke mm 1800 Parallel maintenance throughout the entire process / 有 Advance beam Total length of advancing beam mm 7000 Drill pipe length mm 5525 One-time advance drilling depth mm 5140 Gas System displacement L/min 1030 pressure MPa 0.8 WATER SYSTEM flow L/min 250 Flushing water pressure MPa 1.5-2.5 electrical system Total input power lw 190 Motor power * quantity kw 55x3 Voltage/Frequency V/Hz 380/50 Cable length m 80 Working platform Lifting Height m 87 Maximum coverage width on both sides m 13.4 Load capacity kg 400
Cantilever tunnel boring machine
The XTR8/320 tunnel boring machine has a large span cutting arm and a small diameter hard rock cutting head, with large driving range and strong rock breaking ability. Double-layer layout, increase the installation and maintenance space, the weight of the whole machine is balanced, and the center of gravity is stable. The automatic cable winding control system combines multi-degree-of-freedom cable elevated, and cooperates with the whole machine to automatically collect and release cables, replacing manual operation, protecting cables, ensuring synchronous advancement of tunneling and support, and improving construction efficiency. The spray system adopts venturi nozzle design, which has high pressure and good effect; at the same time, it can be equipped with dust removal fan to provide a good environment for tunnel construction environment.
Cantilever tunnel boring machine
Xugong XTR7/260 Tunnel Boring Machine Product Introduction 1. The new cutting mechanism and the length of the cutting arm determine the adaptability of large section working conditions. 2, the use of 6.4-inch color screen, can be more convenient to achieve data man-machine exchange. 3. New independent heat dissipation system to realize continuous operation of roadheader without water. 4. The winding cable system is convenient for cable placement and rewinding, saving manpower. 5. The shipping agency adopts high-strength wear-resistant plate to better adapt to hard rock conditions and improve service life. 6. The hydraulic system adopts constant power, load sensitive control, energy saving and environmental protection, bypass filtration and high pressure filtration technology to ensure the reliability of machine operation and significantly improve the service life of hydraulic components.
Cantilever tunnel boring machine
XTR6/320 tunnel boring machine is equipped with hard rock type cutting head, with reasonable pick arrangement, strong rock breaking ability, high construction efficiency and less pick wear. Equipped with remote control to improve the intelligent control level of the whole machine. Double-angle trapezoidal external spray, three-layer water curtain partition, large water mist range, good dust removal effect. The hydraulic system adopts constant power, load sensitive control, energy saving and environmental protection, bypass filtration and high pressure filtration technology to ensure the reliability of machine operation and significantly improve the service life of hydraulic components.
Cantilever tunnel boring machine
1. New cutting mechanism, conical frustum-shaped small diameter cutting head, strong rock breaking ability. 2. Modular design of narrow fuselage, body width 2.1 meters. 3, spray with airborne fan double dust removal, effectively improve the dust removal effect, reduce dust pollution. 4, the use of air-cooled and water-cooled heat dissipation, heat dissipation effect is good, in the absence of external water, the host can move long distances. 5. The electrical system adopts international famous brand components, with advanced functions and high stability. 6. The hydraulic system adopts constant power, pressure cut-off, load-sensitive control technology, which effectively improves the life of hydraulic components and reduces system failures. The main hydraulic components are international famous brands.
Cantilever tunnel boring machine
1. New cutting mechanism, conical frustum-shaped small diameter cutting head, double helix cutting tooth arrangement, strong rock breaking ability. 2. Ultra-narrow fuselage modular design, body width 1.7 meters. 3, spray with airborne fan double dust removal, effectively improve the dust removal effect, reduce dust pollution. 4. The shipping organization adopts the anti-card chain design to effectively avoid the phenomenon of card chain and chain jump. 5, air cooling and water cooling, heat dissipation effect is good, in the absence of external water, the host can move long distance. 6. The electrical system adopts international famous brand components, with advanced functions and high stability. 7. The hydraulic system adopts constant power, pressure cut-off, load-sensitive control technology, which effectively improves the life of hydraulic components and reduces system failures. The main hydraulic components are international famous brands.
Underground continuous wall hydraulic grab
1. The mature "H" type telescopic crawler chassis has an expansion width of 3500-4900mm and a wheelbase of 5600mm. It can be equipped with a self-unloading leg structure, which is safe and stable in construction and convenient in disassembly and transportation. 2. The rear double-winch single-row rope structure solves the problem of rope biting and rope grinding, avoids the risk of bucket falling, and improves the service life of the wire rope by 1-3 times. 3. Imported Volvo 13L engine, 315KW rated power output, strong power. 4, the use of Rexroth hydraulic control main valve, the new hydraulic control double winch synchronization technology, to ensure the reliability of equipment construction. 5. High/low speed two-gear control lowering technology, the maximum lowering speed can reach 80 m/min, improving the efficiency of the groove. 6. It has an automatic wire rope tensioning system during the process of grabbing the groove and closing the bucket, which is simple to operate and ensures the accuracy of the groove. 7, self-made increased heavy long guide, large closing force push plate correction grab, high groove accuracy, hard ground grasping ability. 8, optional ± 90 °, 0-180 ° grab slewing device, to meet the requirements of the city's narrow space construction.
Underground continuous wall hydraulic grab
XG500E underground continuous wall hydraulic grab special host has good adaptability to working conditions, high stability of the whole machine, double winch single row rope structure, and small wire rope loss. The construction is efficient and economical. Optional 90 °, 0-180 ° grab rotary device to meet the requirements of construction in narrow space in the city.
Double-wheel slot milling machine
XTC80/55 two-wheel groove milling machine is independently developed for the needs of hard rock formation groove construction and milling technology in domestic underground continuous wall engineering. XTC80/55 is a "one-machine dual-use" equipment with both groove milling and grab functions. It adopts air lift slag discharge mode and independent technology milling wheel transmission structure. It is an economical two-wheel groove milling machine.
Xugong XTC120 double-wheel slot milling machine performance characteristics 1. Coil: (1)80t double winder, stronger pulling force; (2)36mm anti-rotation special-shaped wire rope, the use of safe, longer life. 2: Hood Enclosed soundproof side door design, 25mm polyester cotton sound-absorbing engine room, low vehicle noise. 3. Power system: 571kW imported engine, strictly equipped with independent overhead temperature control for heat dissipation, sufficient power and low fuel consumption. 4. Chassis: Telescopic chassis with removable legs, easy to disassemble and transport, driving force. 5. Tool holder: (1) Full-oriented three-generation heavy-duty tool holder is stronger and more suitable for high-torque hard rock milling; (2) The guiding and correcting ability is stronger, and the groove accuracy is higher. 6. Mud pump: Self-made second-generation large-flow mud pump has strong slag discharge capacity, convenient disassembly and assembly, and economical maintenance. 7. Reduction gearbox: 120kN · m reducer, three generation drive unit, torque increased by 10%, hard rock milling ability is stronger.
Geotechnical rotary drilling rig
"The hydraulic rotary drilling rig is SR-80 mounted on a Caterpillar chassis and is designed for the following applications: -Casing type rotary excavation pile (power head drive or casing driven by a pipe machine driven by the chassis itself); -Casing-free deep drilled piles (dry rotary drilling or drilling fluid to stabilize the hole wall); -Long spiral (CFA)(drilling with a set of long spirals). SR-80 a computer-aided monitoring system with engine power and hydraulic systems."
Shanhe intelligent rotary drilling rig
Performance Characteristics of Shanhe Intelligent SWDM360H Rotary Drilling Rig 1. Special chassis Special hydraulic telescopic chassis for rotary excavation, the main and auxiliary winches are arranged on the platform, with good stability. 2. Auxiliary legs Auxiliary legs on the lower mast can provide auxiliary support, lower casing and rig maintenance. 3. Convenient transit transportation Parallelogram luffing mechanism, back-to-back mast transportation, transfer convenient and fast. 4. High configuration The torque of the power head reaches 418 kN.m, and the rock-entering ability is strong. Remove the lower mast, the maximum drilling diameter can reach 3000mm Parameters SWDM360H III Overall dimension (length×width×height) Working status 10435 × 4800 × 27190 mm Transport status 20160 × 3400 × 3600 mm Overall machine height 27190mm Whole machine weight 123t Maximum drilling diameter 2500mm(3000mm) Maximum drilling depth 102m/66m Engine Brand Cummins Model QSX15-C535 Power 399kW/2100rpm Power head Maximum torque 418kN.m Speed 6 to 25rpm High-speed soil throwing (optional) -- Pressurized system Maximum pressure 340kN Maximum lifting force 380kN Maximum travel 13000mm Master Wink Maximum lifting force 370kN Maximum lifting speed 80m/min Vice winch Maximum lifting force 110kN Maximum lifting speed 65m/min drill mast Left and right inclination ± 4 ° anteversion angle 5 ° Chassis Crawler width 900mm Telescopic width of crawler 3300~4800mm Chassis length 6120mm
Shanhe intelligent rotary drilling rig
SWDM280 medium-sized multifunctional rotary drilling rig has large main hoisting force, fast speed, key shaking function, saving drilling auxiliary time and high comprehensive construction efficiency.
Shanhe intelligent rotary drilling rig
Performance Characteristics of Sunhe Intelligent SWDM220 Rotary Drilling Rig 1. Super durable and reliable bearing The drilling reaction force of the rotary drilling rig is transmitted from the drilling tool to the machine, and then from the machine to the ground. Each structural part of the machine bears the structural stress caused by the drilling force. 1) Dedicated chassis ● The self-developed special telescopic structure chassis suitable for the actual working condition load of rotary excavation is adopted. The whole machine has high stability and can realize 360-degree arbitrary construction, which is more conducive to the structural parts of the whole machine and ensures the balance of the center of gravity. 2) Rolling arrangement ● The main and auxiliary winch is installed on the platform, which greatly reduces the rotary inertia of the upper part of the platform and the tilting moment of the working device, and improves the stability of the whole machine. 3) Square shaft box structure ●The mast deflection seat adopts a box-type square shaft box structure, which directly transmits the force of the mast to the luffing mechanism, eliminating the force exerted by the rotary drilling force on the weak link of the deflection seat, and improving the structural stability and reliability. 4) Drill mast structure ● The drill mast adopts high-strength anti-deformation design, and the rectangular mast section is wider in the guide rail direction, which effectively reduces the structural stress of the mast and can better adapt to the rock-entering construction conditions of high-strength dynamic load. 5) luffing mechanism ● The parallelogram adjustment mechanism adopts wide-width design, with large structural size (I. e., large M size) and large installation distance between the two drill mast luffing cylinders (I. e., large W size), which is equivalent to a large triangular structure. During hard formation construction, the stability of the working device is better. 2. High configuration Efficient and reliable engine matching high-power hydraulic transmission system is a powerful guarantee for strong machine power. The advanced intelligent electronic control system can give full play to the machine efficiency, and the reasonable local structure design can greatly reduce the vulnerability and consumption. 1) Engine ● Using Cummins EFI turbocharged intercooled engine, with high reliability, fuel economy and high efficiency reserve power. Emissions in line with the European EPAC3 standards, green environmental protection, in high cold, high altitude areas can still operate normally. 2) Hydraulic components ● The hydraulic system developed in cooperation with the world-flow component supplier improves the hydraulic energy conversion rate of the component and reduces the pipeline transmission loss of the system. 3) Multi-mode power head to achieve efficient drilling in different formations ● According to different geological conditions, the power output mode matching the load can be selected to make the construction process more efficient and energy-saving. 3. Low Cost 1) Roll Jane ● According to the construction characteristics of rotary excavation main hoisting, the main hoisting device is innovatively designed. Through the design of two layers of rope carrying grooves in the inner and outer steps of the drum, the rope grinding section most frequently used in rotary excavation is effectively protected, and the use of wire ropes The service life is extended by more than 100%. 2) Self-loading and self-unloading of counterweight. ● Can use its own mast disassembly, assembly weight, no need to be equipped with other lifting equipment, saving the cost of auxiliary equipment. 3) Power matching, fuel saving and high efficiency ● The engine-hydraulic system-load global power is perfectly matched, and the hole forming efficiency is increased by 10%-25%; The hydraulic system is optimized to reduce the overflow loss, throttling loss and pressure loss along the system and save fuel consumption by 7%-20%. 4. Intelligent control easy driving Advanced intelligent control system, give full play to the performance of the equipment, while making the operation easy. 1) Safety protection measures ● Shanhe intelligent rotary drilling rig fully consider the safety guarantee, in the construction process rest assured. The cab adopts a special-shaped frame structure, and the front and top are equipped with high-strength plate frame protective covers to provide maximum protection for the safety of the operator. 2) Auxiliary legs ● The legs hidden under the mast can not only provide auxiliary support for drilling construction, but also accomplish some unexpected things. 3) handle self-locking function ● Proprietary electromagnetic locking handle,-key to achieve handle positioning, get rid of heavy physical labor. 4)GPS remote service ● Using GPS. GIS. 2G/3G mobile communication technology, a remote operation and maintenance, monitoring and fleet cooperative operation control platform for rotary drilling rigs is constructed. 5. Multi-functional expansion of high-value embodiment Shanhe intelligent rotary drilling rig has a variety of configurations for you to choose from, to achieve-machine multi-function, diversified construction. 1) Pipe rubbing machine method ● The main engine can be equipped with an external oil source interface for the construction of the pipe rubbing machine, and the pipe rubbing machine construction method is adopted to effectively solve the problem of easy collapse in the construction of the stratum such as quicksand, silt and backfill soil. 2) Simplified driver protection method ● Rotary drilling rig equipped with simple protection driver construction can effectively and quickly buried simple protection, in the backfill soil layer, shallow sand pebble layer, multi-cave limestone layer can play an obvious advantage. The selection of the casing driver can ensure the verticality of the casing and effectively prevent the collapse. The drilling rig and the casing can be carried out at the same time to improve the efficiency of the drilling rig. 3)CFA long auger drilling method ● CFA long spiral drilling rig method can realize continuous drilling pile and grouting. It is a new type of composite foundation treatment method with high construction efficiency, especially for small holes, dry holes and shallow holes. 4) High-speed soil throwing power head ● The power head with high-speed soil throwing function can be configured, and the soil throwing speed can reach 70rpm to realize the high-speed soil throwing function.
Shanhe intelligent rotary drilling rig
SWDM160H medium-sized multifunctional rotary drilling rig has large main hoisting force, fast speed, key shaking function, saving drilling auxiliary time and high comprehensive construction efficiency.
Zoomlian Heavy Industry Rotary Drilling Rig
ZOOPLAN ZR400L Rotary Drilling Rig Product Performance Characteristics 1. Strong rock entering ability: 580 drill pipe is standard, the maximum torque is up to 430kNm, the maximum drilling diameter is 3000mm, and the hard rock depth of 5-section machine lock rod can reach 91m. 2. High stability: adopting eccentric rotary reducer and advanced positioning and assembly technology, the rotary clearance is reduced by 70%; The chassis manufacturing process is upgraded to reduce the expansion clearance by 60%, effectively improving the stability at work; 3. Easy to use: parallelogram structure is adopted, and the transportation height without dismantling the crawler is 3715mm, which is convenient for transportation. 4. Comfortable operation: 12.3-inch capacitive touch screen is configured to realize three-dimensional dynamic display of the whole machine, with high brightness and no visual delay. With the compact control panel, the operation steps are reduced by 30%. 5. Intelligent control: The bottom protection function is upgraded, and the speed is automatically reduced when approaching the bottom of the hole, reducing the impact of the whole machine and the hoisting system, and effectively protecting the wire rope. regular parameters Equipment Model ZR400L Model abbreviation 400 Engine Model Cummins QSX15 Rated power (kW) 398 Displacement (L) 15 Whole machine parameters Total mass of equipment (kg) 130000 Overall dimension (working state)(mm) 10125 × 5000 × 27430 Overall dimension (transportation state)(mm) 19886 × 5000 × 3715 Output torque of power head (kN · m) 430 Power head speed (r/min) 4 to 24 Maximum drilling depth (mm) 110000/91000 Drilling diameter (without casing)(mm) 3000 Traction force (kN) 600 Distance from swing center to tail of main engine (mm) 4845 Mast height (m) 27.4 Chassis parameters Maximum travel speed (km/h) 1.8 Track width (mm) 900 Pressurizing cylinder Maximum pull-out force (kN) 400/400 Maximum pressure (kN) 340/360 Pressurizing cylinder stroke (mm) 6000/16000 Master Wink Main winch Single-layer one-tube double machine Maximum lifting force (kN) 415 Max. hoisting speed (m/min) 75 Diameter of wire rope (mm) 40 Vice winch Maximum lifting force (kN) 90 Max. hoisting speed (m/min) 70 Diameter of wire rope (mm) 22 Mast inclination Sideways (°) 3.5 Forward (°) 4 Tilt backward (°) 90
Contact Us
Copyright of the page©Shandong Boer Machinery Equipment Co., Ltd.
Technical Support:Ceglobal.cn | SEO | Business License